Transformations and Invariant Points
On this page
Two transformations described as one, and the points they leave where they were.
Builds on: Describing and Combining Transformations, Rotations
Key facts
A point is invariant if it is in the same place after the transformation as before it.
Reflection: the points on the mirror line are invariant, and no others
Rotation: only the centre of rotation is invariant
Translation: no point is invariant
Reflections in two parallel lines: a translation, twice the gap between them, from the first line towards the second
Reflections in two lines that cross: a rotation about the crossing point, through twice the angle between them
A 180° rotation then a translation: a 180° rotation about the old centre moved by half the vector
- A rotation and a translation, in either order: one rotation through the same angle and direction. Its centre is the point that ends where it started.
- Describe fully means one transformation with all its details: a rotation's angle, direction and centre (many students leave out the direction; 180° needs none), a reflection's mirror line, a translation's column vector.
Worked example 1: Two reflections in parallel lines
Shape A is reflected in the line y=2 to give shape B.
Shape B is reflected in the line y=-1 to give shape C.
Describe fully the single transformation that maps shape A onto shape C.
- Draw any shape for A, then B and C. Here A has corners (1,3), (3,3) and (1,5).
- (1,3) is 1 above y=2, so in B it is 1 below: (1,1).
- (1,1) is 2 above y=-1, so in C it is 2 below: (1,-3).
- C is A moved 6 down, the same way round: the lines are 3 apart, and 2\times3=6.
- A translation by \begin{pmatrix}0\\-6\end{pmatrix}
- Some students give the gap between the lines, 3: the shape moves twice that.
Now try this
Shape P is reflected in the line x=3 to give shape Q.
Shape Q is reflected in the line x=-2 to give shape R.
The single transformation that maps shape P onto shape R is a translation. Write down its column vector.
Type the column vector as (top, bottom), for example (2, -1).
- The lines are 5 apart, so the shape moves 2\times5=10
- It moves from x=3 towards x=-2: to the left.
- \begin{pmatrix}-10\\0\end{pmatrix}
Worked example 2: Two reflections in lines that cross
Triangle A is drawn on the grid.
Triangle A is reflected in the line y=x to give triangle B.
Triangle B is reflected in the line x=1 to give triangle C.
(a) Describe fully the single transformation that maps triangle A onto triangle C.
(b) One point is invariant under this transformation. Write down its coordinates.
- Reflecting in y=x swaps the coordinates: (2,-3) goes to (-3,2).
- (-3,2) is 4 left of x=1, so in C it is 4 right: (5,2).
- The point (1,1) is on both mirror lines, so neither reflection moves it. C is A turned a quarter turn anticlockwise about it.
- Check: the lines cross at 45°, so the turn is 2\times45^\circ=90^\circ.
- (a) Rotation 90° anticlockwise about (1,1)
- (b) (1,1): a rotation leaves only its centre where it is.
Now try this
Shape P is reflected in the line y=3 to give shape Q.
Shape Q is reflected in the line x=-2 to give shape R.
One point is invariant under the combined transformation. Write down its coordinates.
- The invariant point is on both mirror lines, so neither reflection moves it
- x=-2 and y=3 cross at (-2,3).
- The lines are at right angles, so P to R is a rotation of 180° about (-2,3).
Worked example 3: A rotation of 180° then a translation
Triangle A is drawn on the grid.
Triangle A is rotated 180° about the point (-1,0) to give triangle B.
Triangle B is translated by the vector \begin{pmatrix}4\\2\end{pmatrix} to give triangle C.
(a) Describe fully the single transformation that maps triangle A onto triangle C.
(b) One point is invariant under this transformation. Write down its coordinates.
- A half turn sends each point to the other side of the centre, the same distance away. (-3,1) is 2 left and 1 up from (-1,0), so in B it is 2 right and 1 down: (1,-1).
- Translate: (1,-1) moves 4 right and 2 up to (5,1). The other corners of C are (3,1) and (5,-2).
- C is A upside down, so it is a rotation of 180°. Its centre is halfway between a point and its image:
- \left(\frac{-3+5}{2},\frac{1+1}{2}\right)=(1,1)
- Check: (-1,0) moved by half the vector, \begin{pmatrix}2\\1\end{pmatrix}, is (1,1).
- (a) Rotation 180° about (1,1)
- (b) (1,1)
Now try this
Triangle A is drawn on the grid.
Triangle A is rotated 180° about the point (1,2). The image is then translated by the vector \begin{pmatrix}4\\-2\end{pmatrix}.
One point of triangle A is invariant under the combined transformation. Find its coordinates.
- Follow a corner: (2,0) rotates to (0,4), then translates to (4,2)
- The single transformation is a rotation of 180°, centre halfway between (2,0) and (4,2):
- \left(\frac{2+4}{2},\frac{0+2}{2}\right)=(3,1)
- Check: (1,2) moved by half the vector, \begin{pmatrix}2\\-1\end{pmatrix}, is (3,1), which is inside triangle A.
Worked example 4: Choosing the translation that makes a vertex invariant
Triangle A is drawn on the grid.
Triangle A is rotated 90° clockwise about the origin. The image is then translated.
Under this combined transformation, one vertex of triangle A is invariant.
Find a possible column vector for the translation.
- The invariant vertex ends where it started. Choose a vertex: (2,1).
- A quarter turn clockwise about O sends (2,1) to (1,-2).
- The translation takes (1,-2) back to (2,1): where it must end, minus where it is.
- \begin{pmatrix}2-1\\1-(-2)\end{pmatrix}=\begin{pmatrix}1\\3\end{pmatrix}
- Each vertex gives its own answer: (5,1) gives \begin{pmatrix}4\\6\end{pmatrix} and (2,3) gives \begin{pmatrix}-1\\5\end{pmatrix}. Any one is right.
- Students often reverse the vector: it goes from the rotated vertex back to the start.
Now try this
A triangle is rotated 90° anticlockwise about the origin. The image is then translated.
The vertex (4,1) of the triangle is invariant under the combined transformation.
Find the column vector of the translation.
Type the column vector as (top, bottom), for example (2, -1).
- A quarter turn anticlockwise about O sends (4,1) to (-1,4)
- The translation takes (-1,4) back to (4,1):
- \begin{pmatrix}4-(-1)\\1-4\end{pmatrix}=\begin{pmatrix}5\\-3\end{pmatrix}
Worked example 5: Choosing the rotation that makes two vertices invariant
Triangle PQR is drawn on the grid.
Triangle PQR is reflected in the y-axis. The image is then rotated.
Under this combined transformation, two vertices of triangle PQR are invariant.
Describe fully the rotation.
- Reflect in the y-axis: P, Q and R go to (-2,1), (-4,1) and (-2,4).
- The rotation must take two of these back where they came from. Try P and Q: (-2,1) back to (2,1), and (-4,1) back to (4,1).
- (0,1) is halfway along both moves, so a half turn about (0,1) does both.
- Rotation 180° about (0,1)
- R ends at (2,-2), so only P and Q are invariant.
Next: Enlargements with Negative Scale Factors
More on this topic: Transformations and Invariant Points worksheet with full solutions